DEC 6

The DEC 6 is used for decoupling auxiliary equipment from an EUT tested with 10/700 us impulses up to 6.6 kV peak.

DEC 6 - Decoupling Network for Symmentrical Data and Control Lines

It is used to decouple unshielded symmetrical data and signal lines according standard ITU K.44. Up to 4 wires can be tested simultaneously. To obtain maximum flexibility only decoupling and protection elements are included in the DEC 6. Coupling circuits, which depends on the EUT to be tested, can be placed separately in the test setup. Manual coupling selection of the protection elements for best protection of the auxiliary equipment. Default protection elements are gas arrestors and breakdown avalanche diodes (ABDs). With such elements the capacitive load to the EUT lines is small. The decoupling elements can be selected easily. It is also possible to test without any protection elements.

Find your local contact

Features

  • Decoupling resistors 200 Ohm
  • 10/700 us telecom impulses
  • combination wave 1.2/50 us - 8/20 us impulses
  • 100 kHz ring wave impulses
  • Breakdown avalanche diodes and gas arrestors as protection elements
  • Up to 4 wires can be tested
  • Signal Bandwidth up to some 10 MHz

Specifications and Downloads

Related Products

DEC 5

Decoupling Network for Symmetrical Data and Control Lines

DEC 7

Decoupling Network for Asymmetrical Data and Control Lines

AXOS 5 - Compact

Compact EMC Test System for Surge, EFT/Burst, Dips, Magnetic Field

AXOS 5 - Surge CW

EMC Test System according to IEC/EN 61000-4-5

AXOS 8 - Compact

Compact EMC Test System for Surge, EFT/Burst, Dips, Magnetic Field

AXOS 8 - Surge CW

EMC Test System according to IEC/EN 61000-4-5